Aqua Digital Water Level Controller
Ref: ATC-LEVEL
The Aqua Digital level controller complete with 2 sensors which will automate your aquariums water Level from evaporation. Safety is always the biggest concern, the unit comes with two float switch sensors. The first float switch sensor triggers the feed pump (Included) to maintain the desired water level. The second float switch ensures overflow protection. the Aqua Digital water level controller can also be used to protect pumps from running dry.
Features:
* Two detachable float switches
* Low power consumption: 2 Watts
* Control Power Output: Maximum 2 Amps
Simply plug in a suitably sized pump or powerhead for your system ~ 300 - 750 lph into the supplied power socket and you are ready
The Level controller has various set up options
Product InstructionsMODE A - 1 : in this mode the pump will ONLY turn on if the water level in the system is low AND there is enough water in the storage tank. This is to prevent the pump from running dry when there is not enough water in the storage tank.
MODE A - 2 : With this set up the pump will come on as soon as the water level in the sump drops below the set level. If there is not enough water in the sump, the pump will run dry.
MODE A-3 : With this set up the pump will turn on when BOTH sensors detected that the water level is below the minimum level and stop only when the water rises the maximum level of BOTH sensors.
MODE B : The pump will turn on when the level falls below the minimal level of float sensor 1 and will turn off when water rises the set point of the flow sensor 1. The float sensor 2 acts as a backup sensor in the event the float sensor 1 is stuck. The level controller will not allow the pump to turn on if the water level in the sump/tank reaches the maximum level of float sensor 2.
Price: £91.90 (Including VAT at 20%)
Quantity:
( available for next working day delivery service, order now for estimated delivery on )
OUT OF STOCK - Backorder Only!
