New Products

Aqua Digital palm size O-zone Variable 0-300mg/hr With Timer
Reefdreams are proud to introduce the new Aqua Digital O-Zone fully variable ozone generator.

The Aqua digital Ozone generator comes complete with fully variable 0-300Mg/hr output and onboard timer. Simple to use, just set the ozone to the desired output level for your aquarium and set the timer to your desired on time either 60-90-120mins with a 4 hour off period.

The unit has been designed with safety completely in mind and therefore the O-Zone is fitted with an onboard timer, this not only acts as a safety barrier if any controller you are using fails (other units without timers would continue to pump ozone if a controller failed) but also gives your aquatic environment a break from being ozone dosed which is paramount for your live stocks health

Why use ozone?

Ozone purification in water is many hundred times more powerful than any other purification method without the use of chemicals therefore any water that comes in contact with the ozone is purified and rid of all pathogens - ammonias - nitrites and also has a great effect on nitrate. There is no better way for the irradication of deseases such as white spot or bacteria and funguses in water without the harmful risk of chemicals. Furthermore ozone removes all staining from water literally polishing the water until it visibly sparkles, within 2 days of use you wil notice a major difference in your tank. In marine systems ozone will also increase the production of your skimmer to a new level as all bio masses are burnt off and in all systems having the potential effect of removing nuisance algaes

Difference between Aqua Digital O-Zone and other units?

On cheaper units found on the market such as Hailea the ozone is generated by static corona wire discharge, in time this unserviceable wire oxidises and either stop producing ozone or worse snaps. BUT the Aqua digital O-Zone uses two fixed plates called cold plate poling that generate the gas, the outer plate being able to be removed from the unit for cleaning thus enabling a consistant output of ozone and a unit that with proper care shoud last a lifetime.

We recommend as with all ozone units, the O-zone is best run in conjunction with a controller which can also be found on our website, the Aqua Digital Mv controller being the ideal partner.

Specifications

Size - L 12cm x W 8cm x H 5cm
Output - 0-300Mg/Hr variable
Function - Permenant on/ plus 3 stage timer
Generation - Cold plate poling
Voltage Input - 12VDC UK 220V AC adapter
Warranty - 1 Year
Compliances - CE/Weee/RoHs

email us at sales@monitors-direct.co.uk for product help guidance and support

The ATC800 dual mode temperature controller is an all in one package that not only controls the heating of your aquarium/enviroment but also the cooling.

To operate the unit just wire your heater and cooling equipment into the ATC800 and set you desired temperature, then simply set up your differential temperature (the amount you wish the controller to go above or below your set value before switching on either devise) and then let the unit automate your aquarium/enviroment automatically.

the ATC800 is fitted with a fail safe circuit in case of sensor failure, and the cooling circuit has a built in 3 minute delay between switching to protect any chiller compressor from continued switching

Fully salt water safe probe - ideal for marine reef use as well as all fresh water enviroments

the unit is of a panel mount design and requires mounting in a suitable box

Spec

Size ~ 180x100x54cm
Operating temp ~ -5 - +70 degree C
Power ~ 220V AC
Accuracy +/- 1 degree C
Sensor ~ NTC
Relay ~ cooling - 25amp max
Relay ~ heating - 10amp max
Cooling delay ~ 3 minutes

The ATC~009 pH meter is our highest selling unit

PH Meter with Temperature reading with auto temperature calibration adjustment.

Specifications:

Accurate to .001PH

digital display showing both Ph and water temperature.

Hard shock proof protective case

Easy to follow instructions.

Calibration Solutions 6.86 and 4.01 included.

screwdriver for Calibration included.

Resolution .01 PH ~ 1 degree C

Ranges 0~14.00 PH -5 ~ +50 degrees C

Tolerance ± 0.1PH / ±1.0 degree C

ATC (Automatic Temperature Compensation).

Battery 4x1.5v (AG-13 Button Cell) Supplied

Long battery Life

Dimensions 170mmx36mmx23mm

Weight 91G

10 foot cord, Ag-Ag/Cl reference, extended life, high supression cable jacket.

The PINPOINT pH Monitor is in use by thousands of customers worldwide. This affordable unit remains the only full-time pH monitor with .01 resolution. The PINPOINT pH Monitor requires only a 9-volt battery and is sold complete with probe and calibration fluids. The electrode is also available separately and fits any meter or monitor. Comes complete with meter, probe and all calibration fluids.

* Given proper care, the PINPOINT pH Monitor should last a lifetime.
* PINPOINT pH Probe comes with a 10 foot high supression cable and a BNC connector.
* Powered by a standard 9-volt battery (not included).
* For more details, click for user guide

PH Controllers are used to control the flow of C02 in calcium reactors and planted tanks, or to stablise tank PH in conjunction with a buffer filter i.e Kalk stirrer. Ideal for all aquarium uses, Marine, Reef, Tropical and fresh water.

The Ph controller comes with a 2 year warranty plus pH probe and probe gland for use in reactors and filters

* High / Low switching function
* Accuracy +/- 0.02 points (more accurate than leading brands)
* large easy to read LED display
* 240 volt ac
* 240v control socket
* 5 amp max switching relay
* High grade probe 3 meter cord length