GHL offers now a flow sensor which can be connected to the ProfiLux aquarium and pond controller, with this sensor the flow can be measured and observed permanently.
ProfiLux can display the actual measured flow and warn with an acoustic signal, or by sending a SMS or an email, when the flow falls below a preset value. If wished ProfiLux can switch devices on or off in case of a flow alarm. The sensors are connected at the level ports of the ProfiLux.
The flow sensors are extremely reliable and do not need much maintenance because they work without dirt-sensitive moving parts like winged wheels.
Three different sensors are available:
* Flow 100 - 2000 l/h, nominal width DN10, 2x G1/2" outside thread, articlenumber PL-0866,
* Flow 300 - 5000 l/h, nominal width DN20, 2x G1" outside thread, articlenumber PL-0867
* Flow 540 - 9000 l/h, nominal width DN25, 2x G1 1/4" outside thread, articlenumber PL-0868
* These new products are available from April 2012
We recommend to use a bypass for higher flows.
Shipment incl. 2m cable Mini-DIN<->M12 to connect the sensor with the ProfiLux. Please note: The sensors are shipped without adapters for hoses or tubes.