Jecod "Professional" Range DC Pumps
These new pumps improve on the previous DCT pump design as follows:
Sine Wave controller technology provides super quiet operation
New Digital Controller- Speed Control Settings Between 30%-100% in 1% increments (DCP4000 has 8 speed controller)
Digital display of power consumption.
Suitable for external and internal operation
Seals for input and output connections
Improved Head Pressure Performance over DCT Models
New Enclosed Impeller Design For a more Quiet Operation
Energy Saving up to 65%
IC Electronic Detection- Automatic Power Off Protection Upon No Water
Wear Resistant Ceramic Shaft
DCP-4000 (33W) Maximum flow rate of up to 4,000 litres/hour - adjustable from 1,2000 - 4,000 litres per hour in 1% steps.?
DCP-6500 (55W) Maximum flow rate of up to 6,500 litres/hour - adjustable from 1,950 - 6,000 litres per hour in 1% steps.
DCP-8000 (65W) Maximum flow rate of up to 8,000 litres/hour - adjustable from 2,400 - 8,000 litres per hour in 1% steps.
DCP-15000 (105W) Maximum flow rate of up to 15,000 litres/hour - adjustable from 4,500 - 15,000 litres per hour in 1% steps.
DCP-18000 (145W) Maximum flow rate of up to 18,000 litres/hour - adjustable from 5,400 - 18,000 litres per hour in 1% steps.
Electronic detection of no water enables automatic power off protection
Motor protection if rotor is blocked
Can be used in Marine and Freshwater applications
No copper elements
Long operation life is achieved by the use of wear resistant ceramic shaft
Soft start operation - pump gradually builds up to set flow rate
Feed mode disables pump for 10 minutes
Speed settings (30% - 100%) in 1% steps with power consumption indication - setting is retained if power is lost.
Dimensions: L x W x H (mm):
DCP-4000 = 158 x 80 x 128
DCP-6500 = 196 x 104 x 163
DCP-8000 = 196 x 104 x 163
DCP-15000 = 223 x 126 x 192
DCP-18000 = 223 x 126 x 192
Sine Wave technology Controller
Power adapter with Uk plug
Connectors for rigid pipe
Hosetail Connectors for flexible tube